For Sale:
Petrel GBR 978 Optimum GBR 1039 978 is a Petrel design by John Lewis, built in wood by R. Barrett. 1039 is an Optimum design, designed and built in glass by John Taylor and registered in 2002. These came from an estate and had not been sailed for many years. In spite of being recognised designs, it appears that neither was ever measured. They came with trollies, a variety of sails, electrics but no spars. The hulls are in very good condition for their age, and would make excellent entry level boats for the class. They have been equipped with a single carbon rig ( interchangeable between the two) and everything works as it should. For sale as a package which includes, two hulls with trolleys, one rig, electrics in working order (set up on a 2.4ghz system, not included), the original radio systems, 27 and 40Mhz (not tested), and a variety of additional sails, some of which could form the basis of a second rig. Offers in excess of £650 accepted, buyer collects. Interested? Call Robin on 01590623978 (Lymington/New Forest area). |
Rococo GBR 1056 SOLD
A Bantock designed wooden Rococo, lovely boat - I have always found it very competitive. Not sailed for two years, apart from today to check it all works. Groovy aluminium mast with little used set of Housemartins and a well used Sailsetc suit, both No 1 rigs. A second 14mm carbon round mast is also included for development with an old suit of Housemartin sails. Only used on a small pond where racing is cancelled if smaller rigs are required. Fitted with an RMG winch and a Futaba S3003 rudder servo. The boat has a certificate, with 12Kg displacement, first measured in 2005. Sail box and stand included. Reduced to £680 John Martin Located in Lymington 01590 676914 [email protected] Dolphin design 6m
SOLD Dolphin design for sale.New sails and rudder servo fitted. The boat sails well and has not been messed around with. Reduced to £400 ono. Pick up only, from Ardrossan, Scotland. David Aitken. [email protected] SEISMIC 6m GBR 1005
SOLD Designed by Chris Dicks and built by John Gould in 1994. RMG 280 ES winch and MacGregor DS 589 Rudder Servo. PJ Sails with full A rig and skinny main. Carbon groovy mast. Displacement 12.1 Kgs. Stand. She comes with original measurement form, class certificate and deck patch templates. Good condition and a dry boat. Reduced to £400 Richard Waters (Lymington area) 01590 677336 |
|
Renaissance GBR 953 SOLD For Sale Black Adder Black Adder was designed by Graham Bantock and built by Sails Etc/Wareham in carbon and first measured on 24th August 1993. Her certificate is valid with both keels as a Graham Bantock mark 4 version, a more modern and stream lined design was purchased for £200 a year ago and significantly improves her performance. Both keels are included in the sale. She has a groovy carbon mast and an A and B suit from Sails Etc with jib booms and 2 more A Sails and jib from Dolphin Sails. All are signed by Bill Green in 2000. Clearly a few years old now, but still set really well. She has a RMG sail winch 290ES and Futaba S3001 rudder servo, all in good working condition. She has had no major or minor repairs to the hull but does have the odd scratch as she is nearly 29 years old. She comes with her original measurement form, class certificate, deck patch templates and weights for use with the old keel. The new keel was inspected by John Kiff, a 6 Meter Measurer, in April 2022 with the boat measured, weighed and floatation tested and he confirmed that the new Graham Bantock keel was within the existing Certificate Measurements and he has sent Bill Green this confirmation. Copy available. Black Adder started my 6 Meter journey and have enjoyed sailing her. I have now bought a Ravenna and so with too many boats already she needs a new home. £950.00 ono Located near Ringwood, Hants. Contact Bob Iles either on 07828 750529 or [email protected] |
Dolphin SOLD An exceptional example of a Bob Underwood Dolphin, in popular Endeavour colours. Colours applied in the gel coat. Recently re-rigged and ready to sail. Dacron sails by PJ Sails. Most fittings by PJ Sails and remaining ones from Sails Etc including groovy mast. S100 digital sail winch with Savox digital rudder servo. 15 kg jib trim servo set up with small drum. Ball raced jib swivel. Originally built to a high standard and been well maintained since. A dry boat with a well balanced internal handle. It’s been a pleasure to own and is reluctantly for sale to make room for a new modern 6. The fin keel has shrugged off weed in my local lake over several really bad seasons. £375 without Rx and Tx. Radio could be available subject to negotiation. Gren Thornhill ( [email protected] or tel. 01530 837343). Located in North West Leicestershire. |
Classic/Vintage 6m RC Yacht SOLD
6m Class RC Yacht of unknown design. Wooden construction circa 1985. Lead keel, and rig and sails. 1.6m long. This boat has been kept in storage since last modelled in 1988. Model project 95% completed, all parts intact. Motors and control kit installed but assume not in working condition. It will require significant refurbishment and re-assembly. Sails are 30+ years old and possibly fragile and unserviceable. This is my mother in law’s. Her late husband John built the model as a passion project. Sadly he didn’t live to see it completed. For Sale £150 - view/collect Goldalming Will take reasonable offers - it would be lovely if this yacht could go to a good home to hopefully sail as it was originally intended all those years ago. Paul Osborne - tel: 01483 414888 or 07977 119935 |
Ravenna 6m SOLD
Ravenna design, 'Celtic Lady'. GBR 1016 Carbon hull and carbon groovy mast, builder B Chisum/Sails etc. Previous owners Vicki Mills, Vinnie Zammitt, Richard Dolman and Austin Matthews. Has a certificate. 3 rigs with the boat and a sailbox PJ Sails winch - nearly new. Spektrum DX 6e transmitter , Spektrum receiver, lipo/life batteries for boat and charger , transmitter battery charger - all hardly used. Rain cover for tranny, aluminium case for transmitter, boat trolley and various bits and bobs including connectors, heat shrink etc, This is a complete kit, you just need to charge the batteries and away you go with a competitive six metre. The present owner cannot continue sailing due to poor health. The seller would prefer not to split the ensemble. Price we are looking for £1200 or near offer. Collection from 2 Islands area. (Milton Keynes) I am handling the sale for the current owner so I am the first point of contact: email [email protected] Tel 01525 240049 or 07939 818467 |
Petrel 6m SOLD
R6M to the Petrel design by John Lewis, planked in cedar by Alan Bright. First measured December 92 by Peter Salt and Bill Green, registration no. 936. All in excellent condition and a very dry boat in all conditions. Carries the maximum designed sail area of 1227 sq, inches. Complete with carbon fibre groovy mast, Futaba rudder servo and Andrews Olympic winch (plus a spare winch) and Futaba Tx/RX combo (model 6J 2.4Ghz). with two RX battery packs. Three mainsails (including skinny main) One mainsail unused and 2 jibs (one full size, one No.2). Launching and Recovery handle and transportation box. Just Add Water!! Price: £500 no offers, buyer collects. Contact: Alan Bright, (Beccles, Suffolk) Tel: 01502 470782 e-mail [email protected] |
Drisky 6m SOLD
Designed by John Taylor, registered in 2019, this competitive yacht comes 'Ready to Sail'.
Made from Carbon / Kevlar it is both light and durable in its construction. The associated rig is made from high modulus carbon tubes and employs a ball race deck level gooseneck, with compression strut supplied by Sails Etc. Drisky has an LOA - 1550mm, a Displacement of 12.2kgs and a large sail area in comparison to other 6m, which makes this yacht competitive across the full wind speed bracket. The supporting equipment is as follows:
RMG 280 Winch / Futaba Rudder Servo. All sails are made by Potter Solutions with the jibs having separate accompanying carbon booms. Full Size (A - suit) has some creasing. Full Length (Flat Main Sail) used once. 2nd Suit of Sails are new. 3rd (Storm) Suit of Sails are new. Registered Certificate will be supplied. Best result achieved in this 6m short competitive life, 4th position in the 2019 (UK) Championship at Dartmoor. Contact: Clive Cooper [email protected] For collection West Sussex £1200.00 Psyche Classic/Vintage 6m SOLD For sale by Bournville RS&MBC, an R6M model Psyche. This hull was probably made at Sandwell College under the watchful eye of member Vic Bellerson.
The hull is in glassfibre with a wood deck, all in very solid condition. It has a groovy aluminium mast and aluminium booms but the rig would generally benefit from some attention/renovation. A Whirlwind winch and a rudder servo are included. The sails are dacron, 6m type but are not necessarily sized to match the sail area this yacht would measure at. There is no certificate. This yacht when measured would be eligible for the 'classic' section at the 6m Nationals. It would also make a nice leisure sailing boat if preferred. . Price is £150. Collect from the Bournville club in Birmingham. Contact: [email protected]
|
|
Mehalah 6m SOLD
MEHALAH (design 1992) design for Alan Bright LOA 55.3 inches LWL 43 inches Displacement 30.46 lbs Sail Area 1133 sq inches It was designed and built by John Lewis and Allan Bright in cedar planking. The design is Mehala and comes with top suit of sails plus skinny main on groovy mast. Boat is certified and comes with 40Mhz transmitter, wheeled trolley stand, launching hook and is all ready to sail. The winch is a Graupner Regatta, the Rudder servo is Futaba s3003 and the displacement is 13.75 Kgs. The boat is available for collection from Great Yarmouth in Norfolk and the price is £500. Michael Howard. M: 07757009062 |
Dolphin 6m (Gretel) For Sale -
SOLD Great boat to sail. I am only selling it due to extending of my family and not having the room to store it. It comes with a full set of sails (sails include Number 1 main and jib, Number 2 main and jib and also a skinny main. She has a Titan sail winch and comes with the measurement certificate and 2x Life batteries. I am looking for around £500 for her and collection is from Plymouth, Devon. Tim Nicholas [email protected] |
|
Dolphin R6M For Sale - SOLD
Selling on behalf of the family of the late David Alston: Reg no GBR854 Hull with RMG 280ES winch and a rudder servo. Single mast, with no sails or rigging. £300 including winch but can be sold separately. Contact Laurie Brown [email protected] |
Rococo 6m For Sale - SOLD Built in 2016 in glass by Geoff Earle Carbon groovy mast Savox waterproof rudder servo RMG sail winch with 42mm self tensioning drum Housemartin top suit in (as new condition). Scrim working top suit (Fair condition) PJ Sails Scrim 2nd suit (Fair condition) PJ Sails Rudder upgraded to gunboat style. Currently has Spektrum receiver fitted Fully Measured. Good boat to get into 6 Metre sailing £500 Boat is in Bournville (Birmingham) Steve Hodgkinson 07752743739
|
|
Revival GBR 884 'Bad Moon' SOLD
Fibreglass hull, wooden deck. Good condition. Carbon groovy mast and new carbon bent booms. Measured with certificate. Brand new Housemartin #1 suit, Skinny main and #2 suit. RMG copy winch, and servo. Competitive boat. £450 Boat is in Plymouth, but can help to arrange meeting to collect. Dave Kent 07447901559 / [email protected] |
SOLD
GBR 968 is a Graham Bantock designed Revival once again it is wooden planked this time it comes with two suits of sails. Both boats have not been sailed for some time and maybe in need of a little TLC although they are nicely built and the sails on this boat look to be of a high standard.
Contact Graham Whitehead for more details. |
SOLD
GBR 961 is a John Lewis designed Petrel and is wooden planked it has a just the one sail rig as shown in the inset picture, originally registered at the Broads MYC they are now located at Farnham in Surrey.
Contact Graham Whitehead for more details or to make an offer. |
GBR 1029, "Don't Touch", is an excellent Rococo moulded in carbon/epoxy for the late Ron Cringle by CM Yachts.
She comes with a film top suit, a Dacron top suit and a Dacron reduced height main sail. All electrics are present with Futaba 4EXA transmitter on 40MHz, matching receiver, crystals, Futaba 9204 rudder servo, Whirlwind Atlas winch, batteries and charger. A stand and trolley are also included. Everything you need to get going with a competitive R6M. She is in Hatfield, Hertfordshire £750 Contact Henry Farley to arrange a viewing |
|
Barry Chisum built Ravenna in carbon fibre, recently measured GBR 1030 complete with Graupner Regatta winch (with fly lead) and Sails etc top suit only.
£700.00 Judging from the other hulls we know of this provenance it should be a quick six. Contact Cliff Paskell-Jeffery in Doncaster for more information. 22-2 |
SOLD
|
GBR 924 Tern Blue Hull with 2 sets of sails registered originally as K924* looks like a John Lewis design could be a Tern, not positive
Sails are marked GB there is some play in the rudder tube and a split in the mast whirlwind winch fitted. *Ed Note K924 is an ex Two Islands yacht and was originally called Chilli 3, it is a fibreglass? Tern design by John Lewis by Russel Faraday & John Davies. |
GBR 983 Modified Revival Black hull registered as K983* not sure of design comes with mast boom etc 2 sets of sails (unknown makers mark) whirlwind winch.
* Ed Note K983 is registered as a modified Revival design by Graham Bantock, built and first registered by Mr. Blake-Milton. The boat was originally called Ra. |
Amarillo - Roccoco -NOW SOLD
This Graham Bantock Rococco design was built by Ron Huggett and once again was registered (1036) and certified in 2001. |
|